Adding germs killing agents like chlorine is a regular task for a pool owner or pool maintenance guy to keep the pool a cleaner one. But if you don’t use pool stabilizer with chlorine or other cleansing chemicals, all your effort, money, or time will go in vain. Plus, it adds possible risks to your health. Care to know more about this? Just scroll a bit to get more enlightened.
Familiarizing with Pool Stabilizer
Pool stabilizer is a chemical additive that you can find as a liquid or in the form of granules. Their function is to make the pool chlorine stabilized so that this sanitizer can last longer. Thus, this stabilizer also contributes to keeping your pool water clean for a longer time. You can also hear different terms like chlorine stabilizer, chlorine pool stabilizer, pool conditioner, or cyanuric acid (CYA). No matter in which form the additive comes, its job is to stabilize the chlorine in the pool water. As a result, sanitizer lasts longer. Thus, it helps to keep the pool water clean for a longer period of time.
What Stabilizer does?
Chlorine Stabilizer binds the chlorite ions and thus makes them impermeable to the sun rays or powerful UV rays. Usually, most of the pools are located outside and are directly exposed to the sunlight or UV rays. When your pool water gets exposed to UV rays, chlorite ions break themselves apart, eventually leads chlorine to start evaporating. As per the research, 90% of chlorine get reduced within 2 hours of consistent UV ray. Thus, Chlorine Pool Stabilizer is really important to keep your pool free from the risk of growing algae or other bacteria.
When to use Stabilizer?
When the pool is first opened during the Summer, you need to add a Pool Conditioner. First, you need to make all chemicals, pH scale, and alkaline level balanced first, then add the Chlorine Stabilizer. After that, while using stabilized chlorine every week, you’re basically adding a bit of stabilizer as well. In order to keep the concentration level appropriately balanced, you don’t need to add more than that until any unfortunate occurrences like splash out or significant evaporation occur, causing the lowering of stabilizer density in pool water.
How to add Stabilizer
Pool Stabilizer comes in either granule or liquid form. Stabilized Chlorine is basically a Pool Conditioner being mixed with Chlorine sticks, shocks, Chlorine Tablets, or other sanitizers. Again, they’re two different forms of Stabilized Chlorine; the first one is slowly dissolving Jumbo Tabs, and the other one is Fast acting and dissolving Shimmer N’ Shock additive. You can choose either of them as both of them are highly convenient and easy-to-use. Fill a 5-gallon bucket with water and let the stabilizer dissolve into it. Then add it to the pool, simple!
How much to add in pool water?
There’re different opinions coming from different Pool experts regarding the exact level of CYA (Cyanuric Acid) to be added to the pool water. As per the right-hand rule, it should be limited between 30 ppm to 50 ppm at most. If the level goes past 50 ppm, then it’ll cause chlorine lock. At that stage, the test result will come as 0 despite more and more chlorine being added to the water. You’ll also require consistent water tasting to check the chlorine level of the chlorine stabilizer.
Benefits of Chlorine Stabilizer
- Better Safety: Get rid of the large growth of algae and bacteria in your pool water or surface.
- Time Saver: No need to measure or add the chlorine and CYA separately. Save your time.
- Budget-friendly: Less chlorine requirement in your pool will also save you some bucks.
- Hassle-free: Enjoy two chemicals in just one product.
What to do if Stabilizer gets too high or low?
You don’t need to use a Pool Conditioner to your indoor swimming pools as it isn’t exposed to UV rays. Don’t add too much stabilizer to your Outdoor pool as well. In case the level goes beyond the level, you need to dilute your pool. You can reduce it by using CYA Reducer, though there’re some debates on its effectiveness. The best solution is simple, keep the level balanced and avoid any Chlorine lock.
The level also may go down for cases like huge water splashes, frequent rainfalls, etc. In that case, measure the required amount correctly, and add some extra CYA. Retest again after 24 hours, if necessary.
Swimming is fun, but you don’t want to make this fun activity lead to your or your family’s possible health hazard, do you? Don’t let your pool water get contaminated with bacteria and algae. Don’t risk you and your family. Use Chlorine Pool Stabilizer to make your swimming time safer. It won’t cost much of your money, time, and effort. So, what’s the delay for?