It’s hard to expect more from a motor pump when you are limited within a tight budget. But if researched well, a few models can be found that can offer both protection and durability as a protective pump for your pool.
In search of that heist, we’ve put our hands on the very familiar- WAYNE 57729-WYNP pool pump, and we found some surprising facts that might amuse you.
Therefore, here goes the ultimate WAYNE 57729-WYNP WAPC250 review that explains everything you need to know about this pump before you buy your next best pool pump.
Product Specification
- Brand and model: WAYNE 57729-WYNP
- Body construction material: Thermoplastic
- Motor Power: 1/4 HP.
- Lower water level detection limit: ¾ inches.
- Higher water level detection limit: 2-⅛ inches.
- Switching technology: iSwitch technology.
- Discharge size: ¼ inches.
- Adapter size: ¾ inch.
- Highest water flow: 3000 gallons per hour at 0’ discharge.
- Lower water flow: 900 gallons per hour at 15’ discharge.
- Dimension: 11.2 x 7.9 x 11.9 inches
- Weight: 10.56 pounds
Features and Benefits WAYNE 57729-WYNP WAPC250
Tensionless water removal
As long as it’s about manual pool pumps, water removal comes to be a hectic task. But WAYNE 57729-WYNP will take care of it on its own. All you need to do is to plug the pump in and forget about it. Because once the work is done, it will shut itself automatically.
iSwitch Technology to avoid the hassle
The WAYNE 57729-WYNP uses a technology that is called iSwitch technology. But don’t confuse it with some products from the Apple inventory. It’s just a technology that this model uses to schedule the pump switch.
As a benefit of this technology, the pump will automatically turn on and off as per the demand of the pool. You don’t need to take the hassle of going after it every time you want to pump away the water out of your pool.
If you want more specifics on this feature, here it is-
The iSwitch tech will turn on when the water is detected to be a level of above 2-⅛ inches. On the other hand, it will turn itself off when the water level is detected to be lower than ¾ inches.
A Winter Protection for the Pump
It’s a pity that everyone who owns a pool has to run after the protective gear to protect their pool pumps from the freezing temperature in winter.
But not anymore as long as you have the protection from WAYNE 57729-WYNP on the pump. There is an automatic freeze protection in this cover that doesn’t let any damaging effect take place on the pool pump. Therefore, your pool pump can run winter after winter without the extra cost of repairing or so.
A smartly designed base filter
The base filter, as you can see, is quite different from other models around. They call it the ‘strainer base design filters’ and it has its jobs.
While you are removing water from the pump, it’s an obvious fact that there will be stains and debris from both the top and bottom parts of the pool. The duty of this strainer base filter is to keep the pump free of those substances.
As an impact, debris buildup or stacks of dirt can’t get into the pump and bother the operation anyway.
25 Foot Pull to shore rope
It’s often a scenario that you get in trouble for using the pool pump while installing it on the pool cover for the first time. To meet the ends there, there is a 25-foot pull to shore ropes. It would help you to position the pump on the pool cover.
Protection from locked impeller condition
Earlier, we have mentioned that there is a feature in this pump to protect debris and dirt from the impeller. But that’s not one hundred percent guaranteed.
Sometimes, large and small debris can get into the impeller and you don’t have anything to do about it. So, what would happen then? Will it lead the whole system into severe, unrecoverable damage?
Well, nope. There is a circuitry of protection that prevents the motor from operation while there is a clogged up motor impeller. This would prevent other damages to take place within the pump.
Pros
- A maximum water flow rate of 3000 gallons per hour.
- It comes with a 25” power cord and 25’ pull to shore rope.
- Protects the motor from freezing temperatures.
- Auto shut off in case of locked up, debris-clogged impeller.
- Automatic protection from motor overheating.
- 1/4HP motor power.
- It relieves you from the hassle of manually switching on and off.
- Oil and maintenance-free pump.
- Strainer base filter to avoid debris catch up.
Cons
- The motor power might not be ideal for mid to big pools.
- The water level reader might not be inaccurate over time.
Frequently Asked Questions(FAQ)
Question: How much the pump weighs along with the cover?
Answer: The pump and it’s cover weigh 10.56 pounds in total.
Question: Is the cover heat insulative?
Answer: The cover is made of thermoplastic, therefore, it is heat-protective from both in and out.
Question: What voltage this pump runs on?
Answer: The WAYNE 57729-WYNP runs on a household 115V.
Question: How can I adjust the position of the pump within the pool cover?
Answer: There is a pulling shore rope with the pump that would help you to do that.
Question: Does any battery come up with the model?
Answer: No, there is none of the batteries included. You have to buy them separately.
Question: Is ¼ HP of power enough for a 10,000 gallons pool?
Answer: A ¼ HP motor like this is perfect for pools within 3000 gallons of water capacity.
Bottom Line
Alright, folks. Now that we’ve ended up with the complete WAYNE 57729-WYNP WAPC250 review, we hope that you have already found if this model of pump is perfect for your pool or not.
If you ask for our honest opinion, if you own a small pool, and if you love to leave tasks on the automated system, this will be a bang for the bucks for you.