This post has affiliate links. At no cost to you, When you buy through links on our site, As an Amazon Associate I earn from qualifying purchases.

Hayward SP2610X15 Super POOL Pump Review

Hayward SP2610X15 Super POOL Pump ReviewWhile talking about pool pumps on this website, we have covered a number of models that work with above the ground pools. But when it comes to ground pools, not many good options are out there in the market.

But that doesn’t mean that there are not at all. And Hayward SP2610X15 is one of the highest-rated, functioning in-ground pool pumps in this market.

So, what makes it so popular? Is it worth the money? Let’s figure them all out throughout this Hayward SP2610X15 Super pool pump review.

Product Specification

  • Brand and Model: Hayward SP2610X15
  • Motor Power: 1.5HP(0.HP to 2.5HP available)
  • Pump priming: Self
  • Mounting Base: Yes
  • Suction lift: up to 10 feet
  • Basket Size: 110 cubic-inch
  • Lid transparency: Yes.
  • Operating Voltage: 110 volts.
  • Dimension: 29.8 x 11.3 x 10.8 inches
  • Weight: 38 pounds

Features and Benefits

A handful of power options

When it comes to power factors of a pool pump, the motor HP is the thing that anyone keeps their eye on. Usually, there are only two options in this regard- the 1.0HP motors and the 1.5HP motors.

But what you will get with the Hayward SP2610X15 here is pretty amazing. There are options starting from 0.5HP up to 2.5HP. Within that range, there are 0.75HP motor, 1HP motor, 1.5HP motor and 2HP motor.

For instance, we have selected the 1.5HP version of Hayward SP2610X15, which happens to be the best of both worlds.

High Water Flow Rate

Sometimes, you don’t have hours and hours to let the pump work on a slow basis. When a pool party is about to start, it’s good for you if the pump works with a great water flow.

With the Noryl impeller in the Hayward SP2610X15, you are going to get exactly that. And compared to others, this pump gives a high flow rate with a power-efficiency as well. So you can run the pump less and get more work done with it faster.

Load Extender Ribbings

In the in-ground pool of yours is a large one, there is a good chance that there will be heavy debris laying around on the water. Pumping them out seems to be a hard nut to crack on that point.

To put a smile on your face, there is a load extender ribbing it this pump. What it does is, it ensures a free-flowing operation even while the water is full of debris and leaves and other small-sized specks of dirt.

A State of the art strainer basket

Being an obvious part of any pool pump, strainer basket is a point of attention for anyone who is going to buy a pool pump. The one that got here, is a 110 cubic inches basket with see-through strainer basket lid.

Easy to Install

Some in-ground pool pumps come up with a hectic installing process that pool pump owners hate to embrace. But things are different on this side with Hayward SP2610X15.

To install it on your existing ground pool, all you have to do is put the mounting base in the right place and connect the wires and hoses.

The housing is rugged enough to be durable, and it comes as a one-piece construction whatsoever. There is an array of full-flow ports, ensuring the demand for a constant supply of pool water. Also, the benefit of having the full flow ports is, it endures rapid priming.

Made to be service-easy when needed

Having said that it’s all good with the construction part, there can be issues and troubles every now and then even with this pump. In case such a scenario appears, you can easily access all the internal parts to troubleshoot the issue.

At worst case, if you need to remove or replace the motor or entire drive group, you can do that as well on demand. And if done carefully, it won’t bother the pipes or other parts of it.


  • A highly rigid motor built quality.
  • Swing away hand knobs.
  • 100 cubic inches strainer basket.
  • Transparent strainer basket cover.
  • Access to all the internal service areas.
  • Self-priming.
  • Ceramic seal for heat resistance.
  • Comes with a one-piece mounting base.
  • Corrosion-proof molding for all components.
  • Easy to assemble and disassemble for repair or troubleshoot.


  • Not even an option for above ground pools.

Frequently Asked Questions(FAQ)

Question: How much corrosion resistant this is for water exposure?

Answer: You are not advised to let water expose to the internal parts. But for instance, yeah, the parts are all corrosion-resistant.

Question: Would you be needing a strainer basket in the pump pot?

Answer: To save the impeller from being clogged by the debris and dirt, it’s important to have a strainer basket.

Question: For how long can I run this pump in a day?

Answer: Well, considering all of the gallons of water, bather load, HP of the pump and seasons, you can run it for 8-10 hours in a day.

Question: Is the runtime be the same when it’s cooler than winter?

Answer: During cooler times like winter, the runtime would be less than 6 hours, as there will be less swimmers around.

Question: Is it possible to winterize this pump without a professional?

Answer: In case you know how to assemble and disassemble the pump parts, it’s quite possible to do so without professional help.

Bottom Line

So, that had been the Hayward SP2610X15 super pool pump review. If you consider this as a possible option for you in a ground pool, we would say that it won’t be a best choice.

Considering the built quality and durability, not so many pump models will be able to stand the Hayward SP2610X15. In case you are a DIY kind of person, you can also get rid of the extra maintenance and service costs that almost every pool pump under the sky comes up with.

Good luck with your pool and it’s pump!

Leave a Comment