Review of Best In Pool Umbrella
Top Pick
1. AMMSUN 13″ Beach Umbrella Table Tray for Beach, Patio, Garden, …
- Brand: AMMSUN
- Manufacturer: AMMSUN
- Color: White-13″
- Dimensions: Height: 1.181102361 Inches Width: 5.118110231 Inches Length: 5.511811018 Inches Weight: 0.771617917 Pounds `
Features
- Universal Fit Umbrella Tray: Umbrella Tables easily fit 0.98″ to 1.5″ diameter beach or patio umbrella poles. Adjustable pole adapter will fit on any umbrella pole up to 1.5 inch diameter.Overall dimensions: 13 inch diameter x 1.97 inches tall; weighs 10.1oz.It’s a great size for your beach or patio umbrella.
- Weather Resistant: Beach Umbrella Table is made from durable plastic material so it is weather resistant and easy to clean.Keep sand and dirt out of your snacks and drinks while at the beach or on a picnic with this beach umbrella table! Each table features 2 drink holders as well as 2 built-in trays for snacks or other items so your food and drinks can be as good as you feel while you relax on the beach.
- Universal Fit Umbrella Tray: Umbrella Tables easily fit 0.98″ to 1.5″ diameter beach or patio umbrella poles. Adjustable pole adapter will fit on any umbrella pole up to 1.5 inch diameter.
- Easy to install: Firstly, combine the tray and the hollow cylindrical umbrella pole adapter fastener together.Just slide the umbrella tray onto pole of the beach umbrella , then install it onto the beach umbrella pole and tighten the included adapter fastener screw to hold the table in place.
Best Quality
2. S.R.Smith PL-30 UMB TABLE-61 30″ Umbrella Hole in-Pool Table, inch, …
- Brand: S.R. Smith
- Manufacturer: S.R.Smith
- Color: Seashell
- Dimensions: Height: 2.0 Inches Width: 30.0 Inches Length: 30.0 Inches Weight: 22.0 Pounds `
Features
- 30″ In-pool Table with umbrella hole – Seashell
- Lightweight and super strong; made from resin transfer molding (RTM) for durability and longevity
- Adapter included to allow table to fit most umbrella anchors on sun shelves
- Easy to remove without tools. Comes with 18″ 316 Stainless Steel pole
- Salt pool friendly; Made in the USA
Recommended
3. ALOHA Collection Umbrella Stripe Day Tripper in Pool
- Brand: ALOHA Collection
- Color: Umbrella Stripe in Pool
Features
- Perfect beach essential to keep all of your belongings zipped up and dry. Expandable full zipper top to maximize space in-flight and on the go.
- Carry-on approved. Interior zip pocket to keep your wallet, phone, and other travel essentials close at hand for easy organization.
- Outside zipper pocket to stash your ID and plane ticket
- Made out of a special technical material to keep your stuff protected against splashes, spills, and weather while you go from point A to point B
- Measures 19″ across the top x 14.5″ tall, expands to 17.5″ tall with a 6″ gusset
4. JILINWEI Pool Umbrella Stabilizer Adapter,Threaded Adapter Sleeves ONLY Fits for …
- Brand: JILINWEI
- Manufacturer: JILINWEI
- Color: Black
Features
- Are you still worrying about your pool umbrella lean-on? Try use this threaded adapter sleeves that thread into your pool deck or splash deck.
- ONLY designed to fit the 1 3/4″ Aquastar inserts in your splash pad or pool deck.The sizes listed reflect umbrella pole diameters, not the hole in your pool deck.
- Made of high quality plastic material, UV and Corrosion Resistant.
- Fits easily but snuggly into the Aquastar and holds a standard patio umbrella with just a slight bit of wiggle room.Please mind they do not fit patio tables.
- 100% Satisfaction Guarantee: We believe our Pool Umbrella Stabilizer Sleeve have good quality and our service will obtain your alike. Please feel free to contact us if you have any question.
5. Aquastar US105 Umbrella Stand with Sleeve and Center Cap, 7-1/2 …
- Brand: AquaStar Pool Products
- Manufacturer: AQUASTAR POOL PRODUCTS INC.
- Color: Dark Gray
- Dimensions: Height: 3.0 Inches Width: 2.5 Inches Length: 7.75 Inches Weight: 1.0 Pounds `
Features
- Great for umbrellas, volleyball poles and tiki torches
- Install into hole in geenuite, apply pool finish to top of stand, install decorative sleeve and center cap after pool finish
- Can be installed on floor, step or deck
6. 2 Pieces Patio Table Umbrella Hole Ring Umbrella Cone Wedge …
- Brand: Outus
- Manufacturer: Outus
- Color: Transparent
Features
- Sufficient quantity: you will receive sufficient quantity of umbrella wedge plugs, which are suitable for table hole opening hole diameter 2 to 2.5 inch, please push this wedge gently in order to have it sink into the hole, so please measure your table and umbrella pole before ordering
- Soft and durable material: the patio umbrella cone is made of silicone material, which is soft and durable, not easy to fade and break, has a long service life, can be applied for a long time, and bring you a nice using experience
- Easy to use: remove and disassemble is very easy and fast, you can install in seconds, just push, twist and turn until it’s fully inserted, lightweight and portable, very easy for you to store
- Practical and useful: this umbrella wedge plug is practical and useful, which can prevent scratches on your umbrella pole by friction with the patio table, and reduce the risk of umbrella swaying by wind
- Wide range of application: the umbrella cone has wide range of application, which is ideal for coffee shop, milk tea shop, yard or other glass outdoors patio table
7. UMB Stand W/Sleeve&Cap 7IN WHT US101
- Brand: AquaStar Pool Products
- Manufacturer: AQUASTAR POOL PRODUCTS INC.
- Dimensions: Height: 10.0 Inches Width: 14.0 Inches Length: 16.0 Inches Weight: 1.0 Pounds `
Features
- Great for umbrellas, volleyball poles and tiki torches
- Install into hole in geenuite, apply pool finish to top of stand, install decorative sleeve and center cap after pool finish
- Can be installed on floor, step or deck
9. DGQ Patio Umbrella Cone Umbrella Wedge Plug for Patio Table …
- Brand: DGQ
- Manufacturer: Leateck
- Color: Black
Features
- ☂ Flexible & Soft Material – DGQ patio umbrella cone plug is made of high quality rubber material, soft, flexible & durable, not easy to fade or break, can be applied for a long time, and give you a nice using experience.
- ☂ Fits for Table Holes with 2″ to 2.5″ Diameter – DGQ Umbrella Cone works with any table and umbrella combination. Please check the size before purchase. Kindly Note: For 2″ Standarad diameter hole, please push the cone wedge gently in order to have it sinked into the hole compactly. (lube / oil might help in doing this)
- ☂ Fits for 1.5″ Diameter Umbrella Pole – MEASURE YOUR TABLE & UMBRELLA POLE BEFORE PURCHACING ! This umbrella wedge plug fits umbrella poles up to 1.5 inches / 3.8 cm in diameter; table opening up to 2.5 inches / 6.35 cm.
- ☂ Holds Umbrella In Place – Tapered Design keeps the Umbrella properly seated and eliminates any rattles. This umbrella wedge might have a pre-cut seam at one side for better-fit the umbrella pole, and it works fine inside the patio table hole. No more swaying unbrellas on windy days with this patio umbrella cone!
- ☂ Easy Install, Remove & Storage – Installs in seconds,just push, twist and turn until it’s fully inserted. With overall size 2.75inch x 2.25inch, very easy for storage.
- ☂ A Must Buy for Your Patio Umrella – Pack of 1 pc DGQ umbrella cone in color black.