Review of Best Fiberglass Pool Paint
Top Pick
1. In The Swim Super Poxy Shield Epoxy-Base Swimming Pool Paint …
- Brand: In The Swim
- Manufacturer: In The Swim
- Color: White
- Dimensions: Height: 7.7 Inches Width: 9.2 Inches Length: 12.1 Inches Weight: 14.43 Pounds `
Features
- Ideal for use on Plaster, Gunite, Concrete, and Fiberglass gel-coat surfaces
- A single application can last up to 7 – 8 years
- Delivers a stain-resistant, tile like finish
- Please Note: Epoxy Primer is required for new applications
- Coverage: 125 – 150 sq ft per gallon on average
Best Quality
2. INSL-X Products IG4024S99-2K INSL-Guard EPOXY Pool Paint kit
- Brand: INSL-X
- Manufacturer: TVNOP
- Color: Blue
- Dimensions: Height: 8.04 Inches Width: 7.02 Inches Length: 7.02 Inches Weight: 0.01 Pounds `
Features
- Resists common pool chemicals
- For use in concrete, marcite, gunnite or fiberglass pools
- 350 to 400 sq. ft. of coverage per gallon
Recommended
3. BENJAMIN MOORE & CO-INSL-X IG4042S99-2K Gallon Blue Epox Pool Paint, …
- Brand: Benjamin Moore
- Manufacturer: BENJAMIN MOORE & CO-INSL-X
- Color: Blue
- Dimensions: Height: 8.04 Inches Width: 7.02 Inches Length: 7.02 Inches Weight: 11.6 Pounds `
Features
- 1-Gallon blue epoxy pool paint
- Coverage: 350-400 square feet
- For use on concrete, marcite, gunnite, and fiberglass Pools
- Durable finish is resistant to common pool chemicals
- Suitable for use in fresh and salt water Pools
5. TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood …
- Brand: Total Boat
- Manufacturer: TotalBoat
- Color: Black
- Dimensions: Height: 50.0 Centimeters Width: 100.0 Centimeters Length: 100.0 Centimeters Weight: 100.0 Kilograms `
Features
- ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season; ideal for fiberglass, wood and steel boats in salt water and fresh water
- ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water; minimizes bottom paint build up so you have less sanding to do next season; durable finish can be burnished for smoothness, speed & fuel efficiency
- LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water; ideal for use in marinas and boat yards with environmental restrictions; no maximum dry time before launch
- EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush – natural bristle; Roller – 3/16” nap or foam solvent-safe cover; Spray – airless or conventional; if needed, thin with water, up to 10%; apply 1-2 thin coats; no sanding needed between coats
- AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes; Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints; for use on boat bottoms & hulls below waterline only
6. In The Swim Gunite Primer for Epoxy-Base Swimming Pool Paints …
- Brand: In The Swim
- Manufacturer: In The Swim
- Dimensions: Height: 7.6 Inches Width: 9.1 Inches Length: 12.2 Inches Weight: 16.58 Pounds `
Features
- Two-part epoxy primer
- Used for fiberglass, rough plaster, rough concrete, new gunite or sandblasted surfaces
- Heavy viscosity to fill imperfections in rough surfaces
- Applied with a paint roller
- Coverage: Approximately 100-150 square feet per gallon
8. Kelley Technical Coatings Kelley Tech Olympic Poxolon 2 Epoxy Pool …
- Brand: Kelley Technical Coatings
- Manufacturer: Kelley Technical Coatings
- Color: Viking Blue
- Dimensions: Height: 7.0 Inches Width: 7.0 Inches Length: 12.5 Inches Weight: 12.6 Pounds `
Features
- Uncoated surfaces require a prime coat to insure good adhesion
- For uncoated surfaces in plaster or concrete use Poxoprime II primer
- For Fiberglass and unusually rough concrete and plaster use Gunzite primer
- Easy do-it-yourself application with paint roller
- Covers 250 sq. ft. Per Gallon
9. Olympic Gunzite Rough Surface Epoxy Primer (6)
- Brand: Olympic
- Manufacturer: Kelly Technical Coatings
Features
- Save Hundreds by DOING IT YOURSELF!
- The best epoxy primer for application over rough plaster or concrete surfaces
- The heavy viscosity of Gunzite acts as a fill coat on rough surfaces and provides a much smoother surface to paint over!
10. Kelley Technical 390GL Olympic Zeron Epoxy Pool Coating – White
- Brand: Olympic
- Manufacturer: Olympic
- Color: White
- Dimensions: Height: 7.0 Inches Width: 7.0 Inches Length: 13.0 Inches Weight: 14.0 Pounds `
Features
- High Gloss Finish
- Alternative to Plaster
- Longest Lasting
- This coating may be applied by roller or airless spray equipment.
- Coverage: Approximately 125 – 150 square feet per gallon.